R/C Tech Forums - View Single Post - Team Associated TC6 Thread
View Single Post
Old 08-15-2012 | 08:28 AM
  #7297  
Team Grid RC's Avatar
Team Grid RC
Tech Addict
iTrader: (3)
 
Joined: Sep 2010
Posts: 644
Default

Originally Posted by AJSanDiego
Looking for some help setting up my 6.1 for parking lot racing here in San Diego. This is the track layout (may change a little but not much). Rough - bumpy areas with medium traction:

http://www.youtube.com/watch?v=r1COR...9&feature=plcp

Here is the setup sheet I am following:

http://www.teamassociated.com/pdf/ca...CA2_6-2012.pdf

Seems i am sliding a lot and can't carry speed through the corners. Some is prolly due to me being a noob but I know how to spot/follow a race line. Running a revtech 17.5 (no boost or esc timing) with gearing @ 69/37 so ~ 3.73 fdr. I have a Tekin RS in there now with the choice of an LRP Sxx Stock Spec v2. Usually start with sorex 36s in the am and move to 40s as the asphalt heats up.

I just can't seem to get the times out of the car the fast guys are getting. Not even close as they are regularly running 4 or 5 laps more pre qual/main than I am and some of the "stock" sedans pull away from me on the straight.

Any advice would be greatly appreciated.
Give this mod a try on your Lipo battery. We have been getting good feedback on the results.

It will allow your chassis to flex more freely, resulting in increased traction and less sliding.

http://www.rctech.net/forum/11072002-post7270.html
Team Grid RC is offline