R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 08-13-2012 | 06:48 AM
  #18453  
Wildcat1971's Avatar
Wildcat1971
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default

Originally Posted by Matt Trimmings
Wildcat -- Go back to the AE Pistons (what the manual states), 24mm Ride Height F/R, Switch to JC Groovy / Double Dee (green) tires, take the C Hub off and go back to the A with 1 washer on a standard brace, take the weight out of the front triangles, add at least 1 washer under the front ball stud, rear lower shock inside position. I also only tried the losi springs on my B4 at hobbytown once and went back to the regular brown/green setup. Never liked how they felt, switched to Kyosho springs (pink F/white R) and they were better, now i run Avid (Red F/Yellow R).

Oh and dont come out of the corner hard onto the straight. you need to roll onto the throttle, especially at CV.
Matt, that sounds like sound tuning advice. I was already regretting the losi pistons. And raising the ride height never occurred to me. I guess 23mm is proably good for CH, but too low for CV.
Wildcat1971 is offline