Originally Posted by
Matt Trimmings
Wildcat -- Go back to the AE Pistons (what the manual states), 24mm Ride Height F/R, Switch to JC Groovy / Double Dee (green) tires, take the C Hub off and go back to the A with 1 washer on a standard brace, take the weight out of the front triangles, add at least 1 washer under the front ball stud, rear lower shock inside position. I also only tried the losi springs on my B4 at hobbytown once and went back to the regular brown/green setup. Never liked how they felt, switched to Kyosho springs (pink F/white R) and they were better, now i run Avid (Red F/Yellow R).
I wondered about going back to the A hubs. I dont run smooth high bite clay. Our clay has a spongy feel when you walk on it. Most of the guys run green DD's here, so that is a good call. Groovies > rips? Was thinking rips. I was also thinking of going back to the #2's front and rear, I liked their feel better.