R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
Thread: Tekno RC EB48 Thread
View Single Post
Old 08-12-2012 | 09:32 AM
  #1333  
rice_man's Avatar
rice_man
Tech Fanatic
iTrader: (112)
 
Joined: Jun 2007
Posts: 825
Default
Originally Posted by Ironwolf1974
The steering is locking up far right and left, how far should it turn left and right?

http://youtu.be/iYpsA9wzU8A

Heres a video, not the best, camera phone and not great lighting.

Pleaes tell me if its supposed to do this.

EDIT: ANOTHER PROBLEM! Gah Im just putting this thing together wrong or something. Now the spur gear is catching on the top plate. I need to know if I need to fix either of these things.

Is it ok to grind away some of the top plate?
Don't grind the top plate! I think Zac already mentioned it. There are six shims that go on the outdrive prior to assembly. These are what's needed to keep the spur fro rubbing. And as Thomas mentioned the steering run is caused. Y a slight bulging in the plastic due to the M4 screw being jus a touch long. That will work its way out or you can grind the slight bulge down without issues
rice_man is offline  
Reply