R/C Tech Forums - View Single Post - Help...Engine stalling
View Single Post
Old 09-21-2004 | 09:49 AM
  #2  
duneland's Avatar
duneland
Tech Elite
 
Joined: Sep 2004
Posts: 2,403
From: NW Indiana, USA
Default

Make shure that your idle speed is being set by the idle screw on the carb, as opposed to the throttle trim on the radio.
another possibillity is, lean setting on the bottom end.
also, check or replace the glow plug. If it is the one used for break-in it may be fouled.
duneland is offline