I am running 7mm, outside hole on rear tower, and outside hole on c-hub riser which lines up with inside hole on hub. Also running short camber link in front with 1mm shim under front ball stud. 2.0mm sway bars front and rear. Blue front spring front and white front spring in rear. 32.5 front shock fluid, 27.5 rear, single x-ring, bladder, no boots, 6mm ext. limiters. Front shock middle hole tower, outside on arm. Rear shock inside hole on tower and arm. V2 C-diff with 5 pins, 7k front diff and 5k rear. FT ackerman rear holes. Exotek chassis, 23mm ride height. Tazer wheels on 3mm offset hazard wheels run on med traction outdoor track, wet to drying.