Originally Posted by
Cody227
Not for me. I tightened down the nut as much as possible and it didnt work. The clicker clicks even when the car is in the air (with fulltime 4WD) and i break a little bit. And the clicker is not damaged or something like that. I read often that the clicker dont work and usually they glue the clicker. There is also NO diference in handling with the locked clicker.
No way the clicker can even move
if you tighten down the clicker nut all the way ...
Go ahead , install a piece of tubing , only difference it will make is you won't have to tighten down the lock nut as far on the top shaft .
The lock nut will still lock the clicker the same as if you had no tube .
tip:
Check and make sure you assembled the clicker correctly.