Originally Posted by
knowitall156
Hey Guys,
I just received the above mentioned ESC by fed ex today and it comes with a programming box. Do I need anything else to get me going? I am going to give this esc a try with a Thunder Power 5.0 550 motor in my Durango DESC 410. I'm currently using a Tekin RX 8 with a 4000 4 pole motor and appreciate any feedback you can give me.
Thanks,
Look like you are runnign 4x4 SCT....the GT2 PRO came with the 205g software which is GOOD for 2WD mod or 4WD mod buggy...if you are indeed using it for 4x4 SCT, you will need to purchase the LCD programmer card and change software to 428stock and run BOOST/TURBO.....
If you simply just want to try it, you can run the GT2 PRO now with the 205G and use the included programmer box and adjust the parameter. But I know most ppl who use the GT2 on 4x4 SCT are running boost so you might be behind on the speed...simply because you are running a mild software compare to others who run the boost/turbo software...
Get the LCD box and take advantage of the boost software.