R/C Tech Forums - View Single Post - Share your 17.5 blinky setup
View Single Post
Old 07-31-2012 | 02:16 PM
  #45  
bdyche's Avatar
bdyche
Tech Fanatic
iTrader: (5)
 
Joined: Aug 2004
Posts: 867
From: Marysville, WA
Default

Originally Posted by cadillac
soooo after a few expensive lessons in gearing, i am here now:

losi xxx-sct - went from ball diff to gear diff
tekin rs blinky
tekin redline 17.5 w/ 12.5mm ht rotor
no can timing
76/28
thunder power g6 pro race 5300 65c 2s
sdrc raceway: med to high bite indoor off road clay track, long 90' - 100' straight
we just ran jbrl rd 6.

after 6 min run, motor is luke warm. esc is cold. i am thinking i can go up a pinion or two....or maybe add some timing. any suggestions anyone? should i gear up or add timing? she's a little slow on the straight, but the motor runs a lot nicer than the sonic.
I was at the track yesterday working on my SCX-60CF and actually geared down with added timing with good results. I'm now at 27/81 with 12 degrees of timing with the Tekin 17.5/12.5mm ht rotor. I'm sure some of it was chassis and some of it was more practice, but I shaved nearly 2 seconds off of my best times from Saturday.
bdyche is offline