Originally Posted by
hyperSC82
I have a vtx10r in my desc410r with a vst 550 4.5. Its super fast and smooth but I am having problems with it cutting out when I land jumps. It happens about 2 times a race and steering works never cuts out. I have checked all my plugs I run 4mm soild bullets and I spread them open with a hobby knife and all my solder joints are good. It happens with all my batteries.
I have had the same problems, and I have never really figured out the problem, but it seems to go away when the speedo is mounted in a place where it cannot touch anything (it was doing it to me this weekend until I remounted it away from the reciever that it was touching, and it didnt do it again.)
I also have another problem. I am running a desc410r with the vtx10r with a tekin pro 4 4000. Mid and top range are acceptable, a little slower than I would like, but the bottom end is non existant. I cant even spin the tires when I punch it on gravel. I have tried all kinds of different settings in the pro gauge including raising the punch ( just made it hotter) and messing around with timing (couldnt tell any difference at all) It is almost like the timing is way to advanced, but I have it set at 0. Any ideas would be greatly appreciated.