Originally Posted by
MantisWorx
I have been boosting my Pro4 4k for over a year now with no issues and on many different ESC's. IMO when they tell you not to use timing its static timing that can cause issues, if you ramp timing up higher in the power band you are fine.
That is what I have heard the Speed Passion guys are doing as well, running the latest stock software it appears that has all the super charger stuff and using it for the top end.
Based on what I saw at my race when I went up in pinion size for speed, I may actually go back down and give that a try instead on my Pro4 4000Kv motor.
Originally Posted by
Blitzrockey
The BH is very close to the hw I run I use about 12 degrees of boost timing with my hw 4 pole 4000kv, and down the stright I will pull my buddys rx8 pro-4 4600 with no timing. I start the boost timing at 8000 rpm and it will ramp up as you apply the throttle this works beauty.
Good info, will give that starting RPM a look!