Originally Posted by
mc4798
Awesome setup Matt. we need more of them posted.
Where are you running at ?
Here is my set up:
front-
Ride height - dogbones level
Shocks -40wt AE oil with Kyosho BB Gold
Camber - 1
toe - 1
Rear
ride height- dogbones level
Shocks -35Wt AE oil with Kyosho BB Gold
camber -2
Stock toe block
Diffs-
5k front, 7k center, 3k rear
i use a CKHobby 4000kv 4 pole, 13T stock pinion, HobbyWing SC8 ESC, savox TG servo and a GenAce 5000mah 40c pack.
--
Ran my first race in the vehicle at Mike's Hobby Shop in Dallas. Qd 5th for A-Main and finished 4th in an all losi field. I love the steering in this truck and love the way it handles. Still trying to dial in the spring rate as it still a tad quick. I will try the 22T BB pistons with the above to see if i can slow down the spring rate, other than that, this truck is on rails.
Couple mods I have made, Changed the ballcups to captured ends on the steering knuckle, as well as on the inner front camberlink. Did have issues as Hyper did with the up travel and breaking off the outdrive, added a 3mm spacer to resolve the issue. Also went to longer screws on the bottom shock mount as I had the original back out in my second heat.