R/C Tech Forums - View Single Post - 3-6mm Screw lots Traxxas shafts carries HPI bones axles taps bullet connectors adapte
Old 07-20-2012, 04:21 PM
  #1  
Geee
Tech Adept
iTrader: (18)
 
Geee's Avatar
 
Join Date: Dec 2009
Location: Spokane, WA
Posts: 134
Trader Rating: 18 (100%+)
Default 3-6mm Screw lots Traxxas shafts carries HPI bones axles taps bullet connectors adapte

EVERYTHING SOLD TO ONE PERSON>>>>>>> SOLD>>>>>>>> SOLD>>>
Anyone want to buy everything on this page? Make me an offer cuz I would prefer shipping just one box out.

Breakdown
3mm screw lot - 10.00
4mm screw lot - 13.00
5mm screw lot - 12.00
6mm screw lot - 5.00

Traxxas Parts
Shafts - 15.00
Knuckles - 12.00
Spur/Slipper - 5.00

HPI Savage Shafts & Axles - 7.00

Lipo Taps, Wires, Servo extensions, adapters, 5.5 bullets, etc - 10.00


Prices do not include shipping. Buyer pays shipping. Paypal only.



Below is what I have left of my hobby parts. Over 90% of these screws are from Tonys and a lot have never been used. The pictures let you see what’s included. Lots of different lengths in the 3mm 4mm 5mm and a handful of 6mm flat head, button head, and cap head screws. I also rounded up some grub and set screws that are included in the appropriate MM size range. A couple nuts were included also.




3mm Lot of Screws - 10.00








4mm Lot of Screws - 12.00









5mm Lot of Screws - 13.00








6mm Lot of Screws - 4.00




Traxxas parts
New drive shafts fop the e-revo e-maxx 3.3 etc. Includes the front and rear center shaft for the e-revo. - 15.00






Four axle carriers/knucks with bearing for the e-revo - 12.00



Spur gear, slipper clutch, pads, plate, etc - 5.00




HPI savage dogbones, lengths are (3) 124mm, (1) 124mm, (1) 85mm, (1) 76mm and two axles from the Savage XL - 7.00
.






23mm Hexes and wrench 8th scale. - 8.00




Some electrical left overs - 10.00 for all of the electrical items.
Have some bullet connectors new and used. There are 5.5 and some older smaller one. There are some adapters I put together for variouis reason, like 3.5 to 5.5 bullet adapter and vice versa some deans to whatever those others are…….There’s a bag of balancing taps connectos, switches, some loose wires with plugs on the ends of some of them.





Last edited by Geee; 07-21-2012 at 03:43 PM.
Geee is offline