Originally Posted by nitro_mt_racer

Did some more testing tonight. Paired the revtech with the rx8 and the ballistic with the mmp as was previously suggested. I cleaned both sensor boards as was suggested also. Reset all the timing marks to neutral, double checked all software to make sure there was no timing/boost, turned the current limiter to 60% on the rx8 and geared it 14/40 per Jim Dieter's comments on revtech's website. Ran 5 minutes and temp'd 194°. Geared the ballistic 16/40 per the scte manual, ran 5 minutes and temp'd 210°.

I ordered all new bearings for both trucks today. Probably should have ordered bearings for both motors today too but forgot about it until after the order was placed.