Fits: LOSI 8ight Buggy or Truggy
LOSI 8ight 2.0 Buggy or Truggy
LOSI L8 Dirt Oval








FEATURES: This Mount is CNC machined from
7075 aircraft grade aluminum and Black Anodized. These are designed
with a base mount and removable top blocks. Once the mount is installed
in the vehicle and the gear mesh is set you can remove and reinstall the
motor without resetting the mesh.
Another new feature is be flipping the top blocks from front to back you can
move the motor forward 2mm. This will allow you to run a standard 3 clutch
shoe setup without using an excessive amount of shims.


The extended arm is secured through the existing fuel tank hole in your chassis
so you do not have to drill any new holes.

Extra mounts can be purchased separately so that other motors
can be swapped out quickly.

++ Mount can not be used with Roto or Pull start motors ++

INCLUDES:
(1) Base Mount
(1) Set of top blocks
(1) Fuel Tank Post
(1) 5-40x 1/2" Alloy Flat Head Cap Screws
(8) 5-40 x 1/2" Alloy Allen Head Cap Screws
(4) M3 lock washers (used with screws that hold the top blocks to base)


SPECS.
Material: 7075 Aircraft Billet Aluminum
Weight: 35.83 grams (base, fuel post and 2 top blocks - no hardware)

Instruction Link: KPI-215

Hardware Kit Link: KPH-030