Front:
1*toe in - check
0 camber - check
yellow springs -check
yellow sway bar - check
30k dif fluid (kyosho grease works best) check check
shock outside on arm middle on tower check check
24mm ride height - no idea, lol. my ride high gauge will be here in a few days.
4mm Roll center shims - I had 5mm, will take one out
camber link on outside - check

REAR:
3-2 block - broke mine, need a new one
-2* camber - umm, ok. I had 1 deg
Front green or white springs - would need to buy, have rear yeallow and front blues atm
blue sway bar - check
5k grease in dif - check
shock inside on arm middle on tower - check
24mmride height
1mm Roll center shim - umm, ok.
camber link on inside and #2 from the inside on hub (no 8mm mod yet) - umm ok.


This is pretty close to my original setup. Yes, I have the VTS.



***** I do not have a FT and no chassis brace and saddle packs.