Need some help tuning my buggy. I just installed a RCRD +8 Chassis. The Chassis gave the car a ton more steering but I have lost some rear traction. I have trouble entering the turn coming off the streight it just wants to spin out. Forward traction is also less. I need to get this buggy hooked up in the rear. Here is my setup that worked very well with the old chassis. Let me know what you think I can change to hook up the rear a bit better.

FRONT
Camber: -1/2
Shocks: 1top 0bot
Camber Link: 1A w/ 2 Washers
Toe: 0
Ride Height: 24mm
Axle Height: Middle
Caster: 30
Bump Steer: 2mm
Shocks: Avid Yellow springs. 35 wt. AE Oil #2 piston 3 limiters

REAR
Camber: -1
Shock: 1top 1 bot
Camber Link: B1 with no washers.
Wheel base: short
Ride Height 23mm
Shocks: Avid Red Springs #2 Piston AE 30 wt. oil 2 limiters
TOE: 3degree with 2 degree anti squat