Originally Posted by CristianTabush

Below is a good starting set-up for the 6/6.1


Front:
-1,1,1.5 Piston 550cst oil
-15.5lb spring
-Outside link on tower caps (shorter) 3mm underneath the inside link, 2mm outside (position 3 on turnbuckle will substitute)
-3A Roll center blocks
-4 Deg Caster
-Shocks 3rd hole from the inside on shock tower
-6 on droop
-5mm ride height
-Slipper Spool/ spool tight
-Black sway bar

Rear
-1,1,1.5 Piston 450cst oil
-13.5lb spring
-Outside link on tower caps 2mm underneath inside, 3mm outside (position 3 on tower will substitute).
-3A Roll center blocks
-shocks 2 holes out on shock tower
-5 on droop
-5.5 mm ride height
-Gear diff 700cst oil
-2.5 inboard toe 1 deg toe hub (if you are not running toe in hubs, 3 degs inboard is enough toe)
-Black sway bar

-5.5mm ride height