yes you can, but it is not as simple of just ANY 1/10th setup in it.

for speed controls - as it seems like you like tekin (and alot do) you would want the rs pro and if you have followed this thread, some have ran the rs pro with the tekin 5.5 sc4x and some with a 6.5 540 brushless motor.

but if you want to run a motor like the pro4 or the tenshock for example you will want to run an rx8 or other higher amp speed control.

with a 550 you generally run the 32p spur/pinon, with 540 you run 48p spur/pinon.





550 on the left, 540 in the middle, a 550 motor has more torque due to the extra magnet length which is very nice with these heavier 4x4 trucks.