Originally Posted by
Spawne32
What are you guys running motor wize, was looking at trying to stuff a 540 long in there with a new ESC but im not sure if the 25T pinion gear will fit the 4mm shaft on the motor. Also trying to get the slop out of the suspension in the front control arms, found a video on youtube of a guy using set screws in his diff cover but he wont list the size of the set screws, he just says you have to buy them off him.
I'm just running a normal 25.5 Novak brushless motor. I never seem to have problems with pinions and I've crammed a 41 tooth in there(64pitch). I doubt I would try and eliminate slop in the front arms. At the end of the day, you're just adding another variable to get hung up or a place to break once you start drilling holes like that. The slop is there for a reason. If you don't want slop, get a TA-05 or something. The car has a ton of grip and is simple. That's why it's fun to drive in slower classes while racing. If you aren't racing, that's a whole different story.