kyle478

Tensoric 10

A CNC milled from solid metal housing is used directly for cooling and effectively prevents the penetration of dust and splashing water.
To further improve the cooling performance a fan is supplied with 4 mounting holes. The initialization of the controller works with a simple keystroke.
The TENSORIC10 can be programmed directly via the SET button, or via an optional programming box.
2 sensor ports for optimized wiring

Features Features
o low internal resistance
o splashproof
o softsensored - the controller continues to break the sensor signal
o easy to program using Set button or hacker PROGBOX
o upgrade capability via optional programming box
o switched BEC
o Programmable Timing
o Programmable start-up stages

Specifications
Constant current 160A
Max Power 760A
Internal resistance 0.00025 ohms
Battery Type 1-3S LiPo/LiFe * 5-9S NiMh 1-3S LiPo / LiFe * 5-9S NiMh
BEC 5.8 V max. 3A
LxWxH 41.5 x30x20.4mm without fans
Weight 44g without cable



Tensoric SC

The TENSORICSC we developed specifically for the 4x4 Short Course class.
With the size and weight of a Short Course truck the requirement for power is increased.
In connection with our Motor is SKALARSC, this controller is the perfect unit for the new racing class.

Features Features
o low internal resistance
o splashproof
o softsensored - the controller continues to break the sensor signal
o easy to program using Set button or programming box
o upgrade capability via optional programming box
o Programmable Timing
o Programmable start-up stages

Specifications
Constant current 100A
Max Power 520A
Internal resistance 0.0007 ohms
Battery Type 2-3S LiPo/LiFe * 6-9S NiMh 2-3S LiPo / LiFe * 6-9S NiMh
BEC 6V max. 3A
LxWxH 53.6 x 36.36
Weight 74g without cable


Tensoric 8


With the TENSORIC8 we have developed a controller that is specifically tailored to the needs of large models.
The design provides up to 6S Lipo use.
The TENSORIC8 comes preconfigured with wires soldered to the ends of motor and controller and can be connected via a plug-in system.

Features Features
o low internal resistance
o splashproof
o softsensored - the controller continues to break the sensor signal
o easy to program using Set button or programming box
o upgrade capability via optional programming box
o Programmable Timing
o Programmable start-up stages


Specifications

Constant current 180A
Max Power 760A
Internal resistance 0.0002 Ohm
Battery Type 2-6S LiPo/LiFe * 6-18S NiMh 2-6S LiPo / LiFe * 6-18S NiMh BEC 5.8 V max. 3A
LxWxH 55.6 x 46.6 x34mm
Weight 106g without cable