Originally Posted by
cwoods34
What brand spur are you using? Not all will line up properly. I will check what I am running tomorrow..... I use 94 and 96 with pinions up to 50 and can always reach the screws.
Be careful what you determine as "full lock". I add EPA until the tires are about 1-2mm from the lower shock mount..... If you add EPA based off the knuckle touching the caster block you may add too much and rub the shocks.
I don't know about those electronics, but with my DX3R and KO servo I get maximum steering with the left/right EPA's at around 120, and my overall steering rate turned down to 85%...... i could dial a lot more in but it would rub.
It's around 1-2 mm away from the caster. My DR is at 100% and EPA is max at 150 both left and right. And the horn is tilted 10Deg as the manual states.