R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 06-18-2012 | 06:49 AM
  #25181  
Evil Genius jr.'s Avatar
Evil Genius jr.
Tech Master
iTrader: (28)
 
Joined: Jul 2011
Posts: 1,758
From: Northern, VA
Default

Originally Posted by ilanstylz
I was thinking of changing my setup since my local track changed layouts and as of now there are no real big jumps or long straightaways so I was wondering if this setup would work well?

2 Stage pistons
25w oil front
22.5w oil rear

Blue springs up front and either green/white fronts in rear

24mm or possibly 23mm ride height front/rear

Orange swaybar front, either blue/yellow rear

Running FT slipper setup with garodisc pads and exotek inner hub that locks the front...........

5k rear diff and 10k front diff

-2 camber rear/front with a little toe in on the front..

Here is a video of the track and its latest layout, any other tips advice would be greatly appreciated, thanks.......

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
Thats should work great! Try 5K front also. That is almost my setup exactly and it's awesome.

Originally Posted by nikos2002
How much droop are guys running front and rear on your trucks?
3 turns out front and rear from the rod end.
Evil Genius jr. is offline