Originally posted by InitialD
40wt oil as in shock oil? Becareful as they are silicone based. If for some reason they splatter on the clutchbell, they tend to stick on it more stubbornly than normal oil. Make sure you clean them properly.
Yeah, the harder the REAR sway bar setting, the better the car becomes. Especially on throttle.
Ok, will be careful with the oil. What I normally do is to clean them with brake cleaner; put them in the oven for a good 10 mins at about 100 C and then whilst still hot put oil on the shields and let it seep through - which happens quickly as the bearings are still "hot".
After they have cooled down, I wipe all excess oil off.
Have you already got the new anti-roll bars?
