Originally Posted by
CraigM
If it's not the hinge pin then the block you took off may have been bent. I use .75mm spacers instead of 1mm behind the arm which gives you free movement and perfect play. Check too that your rear block is straight too, they go on crooked all the time and can cause binding, though most of the time I've found that it's the upright that binds.
Actually Jilles has a video on how he gets his suspension free
Cheers, yea if spent another 2hrs completely re building the rear end. It isn't the hinge pin but something just isn't where it needs to be. Both hinge pins are straight with no bends at all. The other area I thought it might be would be the sway bar mounts as well. I need to replace those as I just snapped one. Ive only run one pack through the car with no prangs at all. Doing my head in a bit but thanks for the advice again Craig!