Originally Posted by COBRARACING

You dont seem to understand from my posts or my emails .The 150 amp esc needs massive power to run the high kv low wind motors you are running you get what im saying ? The 150 amp xerun is made for monster trucks,truggies and 1/5th scale rc cars not for sct's .Run a higher turn motor and you will see your problems will dissapear .The venom 2 cell pack no disrespect to then just doesnt have the discharge current you need to run those motors .

Have you tried two packs in as a 14.8v to see if your so called delay is gone im sure you wll see it will dissapear .You said you get this issue after sometime of running i think you said 2 minutes well do you know your battery packs voltage drop is it steep or it it linear ?if its steep then yes you will get the delay as the esc will lose it's punch as the current is lower than what it was because of the voltage drop .Low voltage low current less punch /torque and thats when you issues start as the esc and motor are demanding at that period of time the current and the battery just cannot produce it you understand now ?You need to understand that if it is happening after 1-2 mins it is not your esc it is your power source

I dont know anyone that runs a normal 2 cell on the 150 amp setup with so low turn motors as what your running .yes it can run it but not so high kv rated motors that your running .

If it was made for sct's we would have not manufactured the sct pro .