R/C Tech Forums - View Single Post - SC10 Thread Part 2
View Single Post
Old 06-03-2012 | 11:33 AM
  #68  
J_Bone's Avatar
J_Bone
Tech Master
iTrader: (8)
 
Joined: Dec 2004
Posts: 1,070
From: Mesa, AZ
Default

Originally Posted by gamedog1966
but what i want to know is why would anybodh run the avid springs if the losi ones have a larger selction between rates as the avids only have a few
Avid made them for the most used spring rates. When I looked at the rates, those were in the ranges that I would use for racing.

Originally Posted by gamedog1966
by adding limiters in the shocks and taking roll away from the vehicle what is the reason for this? at my home track i actuallyh needed to add roll so i can push even harder thru a large sweeper and it allows me to floor it thru that section and not traction roll. so having less roll is beneficial in what way?
More roll will put more weight on the outside tires for more traction. By limiting roll (weight distribution), it will take away traction rolling too.
J_Bone is offline