Originally posted by Nick Simpson
No herminator i have them on the right way
If i put them on the opposite side then that only gives me 1deg on each side
The Chassis has 1.5~1.8 of toe in built into the chassis on the rear sus arm mount locations
... if you have the 1 deg hub you should have anywhere from 2.5~2.8 deg toe in.. if you have the 2 deg hub you`ll be in the 3.5~3.8 Range..
if you are still haveing problems..check to see if the Black sus arm balls are bent.. this will through ..everything off a bit
-Dave