Originally Posted by
ilanstylz
Need your guys help, normally I would create another thread for this but there are alot of guys on here that are very knowledgeable so hopefully someone can help me out.........
Ever since I started using mylaps transponders I've been having very bad glitching issue's. I had it mounted right on top of the servo, even tried moving it on top of the drive belt area....... My electronics are tekin rx8/pro4 4600kv, futaba 4pl tx/rx, spektrum 6030 servo, and nanotech 5100 65c lipo's...... Even running it with a glitch buster......... Thinking it was my transponder I took it off and it was doing the same thing, I think I may be having some interference with my local tracks timing system, because throughout the whole day it was not turned on, and as soon as the owner turned it on I started having the glitching issue's with and without the transponder. Any idea's if I'm right or anything else it could be? Also would raising or lowering the current limiter on my rx8 have any affect, and I might even switch rx's and see if that does anything......... Thanks in advance
I was having the exact same problem with my Spektrum DX3r so I went to RCX this year with the intent of solving the problem. I spoke with a guy at the Spektrum/Horizon booth who told me they've never heard of this problem. I then went to the Futaba booth & that guy actually admitted to me that they've been hearing about this problem particularly in the So Cal area at tracks that have a lot of Futaba radios present. So I spoke to a few of the hobby shop booths that were there and picked their brains which left me to decide on either Airtronics or KO Propo. I ended up cracking for KO Propo's new EX-1. I never thought I would own a KO Propo but I haven't had one glitch/brown out with it yet.
Not saying that swapping RX's won't work for you but it didn't work for me with the system I was running.