Originally Posted by
Oasis
Oh nooo you used the M word..what ever you do.. DO NOT refer to that pesky "thing" on this thread again..
..
For what it's worth, while skimming through the manual, looking for AE's guidance on using the included limiters, I came across a bit about the initial ride height being 27mm.
Originally Posted by
MantisWorx
The fix is in the box!! the kit comes with spacers for this reason. IF you dont run the limiters you will bend dogbones and wear out the dif. If the shock towers were any different it would effect droop and the handling of the truck in a bad way, there really is no other way around it.
Yes! This is great! I am not saying I don't want to run limiters, and I am definitely not suggesting any design changes to the shocks towers. The only thing I am saying is that for a rookie like myself, I need to be told to put the limiters on, or at least warned what may happen if I don't. And I should not have to participate in a thread on a forum to have this knowledge. It should be in the manual or on their site in a "notices" or "updates" type section.
All of this being said, I am happy to learn the hard way some things, and in this case that's how I see it. No worries, I will make the required fix, rebuild my diffs. if necessary, be grateful that others with more experience have invested the time to be able to tell me flat-out what the fix is, and continue to think that if AE knows of an issue, they find a reasonable way to publicize it for all.