Originally Posted by
Oasis
Well on a big outdoor track the Losi is going to dominate..but you can make your SC10 competitive..one..don't waist your money on 2 stage pistons..they don't work..to all you fanboys..
..go to emulsion shocks.. get rid of the bladders, raise the rear camber links (inside)..it should give you more rear traction..raise your ride height (on a high traction indoor track I'm at 24mm) I would try 27mm, on my Losi the magic number is 28mm..so 21mm is way to low, to me you were undergeared..I'm at 13/62 on a small indoor track..might want to go up..check motor temps..
Thats funny as hell, Ryan Lutz runs and loves them as well as 100's of others on the pro and am level. Dont hate if for some reason they dont work for you, that is a YOU problem not an US problem.
Put your money where your mouth is and prove that they dont work instead of basing your opinion on something you know nothing about.
I suppose the cdif "doesnt" work either........
As i look over your post pretty much everything you say is WRONG!! 27mm ride height on an SC10?? WRONG you dont compare a heavy azz losi to and SC10 and figure to make it run like a Losi set it up like a losi??
13/62?? everyone that is knowledgable knows that you dont run pinions that small just because its a small track. Running a BL motor with a pinon that small can overheat due to over spinning but i guess you already knew that.....