[QUOTE=MantisWorx;10755329]Post your setup, all of us can agree that out of the box the truck is a handful but with a few simple mods it can be a demon. 2 stage pistons and Garodisc along with a front end alignment will change your world. 1*toe in, 0camber 5mm inside camber link spacers and give it another try.

Here is my set up.
Front suspension.
running option rack back position.
2.2 front swaybar
-1 deg camber
0deg toe
outside hole front camber link 2mm washer
20 tooth standard pulley
24mm ride height
front shock position middle tower outside arm
front shock yellow spring 1.2mm piston 32.5wt no rebound emulsion shock end un screwed 2 turns.
8mm up travel limited
20,000 front diff fluid

rear suspension
medium wheel base
2.0 rear swaybar
-1 deg camber
24mm ride height
3-2 toe block
camber link mod 7mm inside on tower and middle on hub
rear shock position middle on tower and inside on arm
20 tooth standard rear pulley
slipper de-coupled
8mm up travel limited
rear shocks yellow springs 30wt 1.2mm pistons no rebound emulsion
7000 rear diff fluid
I'm running the FT kit with saddle pack. I have 1oz on each side of the battery 1oz in front of battery and 1/2 oz next to gear cover. Also running a tekin 550 5.5 motor and LRP sxx tc speedo. I'm geared at 14th pinion and 62 spur wit no heat problems I feel I could go 15th pinion with no problem.
any help would be great.