R/C Tech Forums - View Single Post - Tamiya mini cooper
View Single Post
Old 05-20-2012 | 01:01 PM
  #17065  
Granpa
Tech Elite
 
Joined: Oct 2006
Posts: 2,367
Default

If you are traction rolling on a low grip surfacewith S grips, that is unusual.

This is my setup on my M05 which seems to work on every track surface I've run it on.

Shocks TRF TC shocks with 28mm shock piston rods. 40 wt Losi shock oil. 3 hole pistons. No red sponge on the diaphragm and no internal shock limiters. Zero rebound.

Springs. From the #53333 spring set. Yellow fronts and blue rears.

Light rear roll bar.

Rear camber is 1.5 degrees and the ride height is "motor boated" 1mm. Won't spell out the exact amounts cause it depends a lot on where you measure it.

Last edited by Granpa; 05-20-2012 at 01:27 PM. Reason: Misread Bukil's post
Granpa is offline