R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 05-13-2012 | 09:22 PM
  #14694  
Tyler Keel's Avatar
Tyler Keel
Tech Master
iTrader: (12)
 
Joined: May 2004
Posts: 1,342
From: Moore, OK
Default

Originally Posted by Leadfinger2011
Whats' up all,
Getting tired of waiting for AE to deliver on the big bores so I'm going to do the conversion and I'll start with Losi 12mm springs. As I dont want to invest a whole lot in this, what a good spring set for a dry dusty track where rear wheel bite is difficult. I'm not a winner yet just a runner but I want to continue to improve so your help with starting spring will help and be much appreciated!!!! I'm running 35 oil in front and 30 in the rear but can change if necessary.


Kevin
I'd start off with buying Red/Orange for fronts, and White/Pink/Yellow for rears. It's not all that expensive. I think the springs are only 6 a pair. For your rear, I'd go with something soft to get the car to roll and give you a little more rear traction. Also, go down in your oil weight to get the same thing. I run on a similar type surface and I run 30/27.5 or 30/25 when it gets real dry.
Tyler Keel is offline