R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 05-12-2012 | 05:13 PM
  #14625  
madweazl's Avatar
madweazl
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Originally Posted by zipperfoot
Nose up off the jumps, pushing out of the corner? Sounds like the front end may be a bit stiff. I would start with the springs, pistons or oil, etc., before I started moving hubs. What about ride height? As weird as it sounds 1mm can affect my traction. Just my two cents.
Was working with what I had on hand. Didnt want to spend money on springs until the Avid units arrived so I made changes elsewhere. I have Losi springs and cups for my 22 but didnt have an upper retainer so I didnt bother. My adjustment of choice would have been a softer spring up front.
madweazl is offline