R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 05-06-2012 | 06:01 PM
  #22794  
johnbugman's Avatar
johnbugman
Tech Regular
iTrader: (8)
 
Joined: Sep 2011
Posts: 450
From: saint petersburg, florida
Default

Originally Posted by fq06
Other than 1 nano pack that showed me the need of keeping the bullet connectors fresh, no problems with the other nano's. I run a 411 4600 rx8 with exotec chassis and scte aluminum stuff and 35 grams of lead front left so I'm not light and the nano's run 95% as good as my reedy that was $115. It was more than likely a old connector because those 65c saddles can handle everything the 411 (and esc) can ask for.

And yes, fortunately like yours my solders let go before my lipo got that bad so my one throw away did not look nearly as bad... but same thing, a throw away.
ya the packs are only about 10 charges old connectors not a problem. definitally faulty batteries. ive puffed 4 packs so far 2 for me and 2 for my brother running the higher kv tenshock in his. i think its 5200 kv.
johnbugman is offline