Originally Posted by
mberta2
I have a 300watt PC power supply. It is 17amps at 12V. Would this work for converting to a charger power supply?. I would be using it with a 10amp charger.
Many of these seem to be over-rated and for other reasons don't quite make the rating when powering chargers (in addition to having low voltage many times)
However if we trust the numbers and go wit that then you could do any job up to 200 watts. OR you can do any 10 amp job up to 20 volts or less. If you go over 20 volts then it won't cut it.