Originally Posted by
drtdvl4
So that is an FDR of about 10.2. Is that a common FDR for an SC10? My gear chart that came with mt ESC suggested 8.5 for a 13.5T, which is what I am running. Temps are about 140 after 5 minutes.
Also, looking at your setup sheet, you say you are running the AE weight block (3 oz) plus another 3 oz behind the batt?
Thanks for all your help!
The AE ballast is only 20g.if your temps are 140 after 5 min then leave it as is or even gear up a tooth or 2. What gears are you running. My 8.5 liked 21/84-22/84.