Originally Posted by
symmetricon
I have the copperhead/5150kv on the way along with the programming card. Im gonna be putting in in my lightweight scte and am looking for some gearing recommendations along with esc setting. I am running on a medium large 1/8 covered clay track with medium traction, and am looking for the edge in speed with this combo. Any suggestions are welcomed
I would recommend starting at a 13, personally I usually ran a 14 on a medium to large indoor offroad track although if you don't have a large straight a 13 may be just fine for you.
I believe I ran profile 4 in the esc but turned the timing down to 3 or 4, sorry I'd go check but I'm only running 2wd now lol...