R/C Tech Forums - View Single Post - B44.1 Thread
Thread: B44.1 Thread
View Single Post
Old 05-01-2012 | 09:18 AM
  #2028  
TJMac's Avatar
TJMac
Tech Addict
iTrader: (2)
 
Joined: Aug 2011
Posts: 509
From: Central Florida
Default

Originally Posted by Tyler Keel
Won't be rebuilding diffs much if they're built properly from the start. As far as the drivetrain goes, just add 2 shims on top of what the kit says to place to each side of the diff before you place it in the transmission case (6 gear side/4 other). This will prevent it from moving side to side and stripping teeth off the gear.

As far as cost after kit, the kit is race ready out of the box. Put in some electronics and grab some throttle.
Bingo. I've done very little outside the stock setup. I also haven't upgraded anything (doesn't really need it). Car is a missle. You will break front arms and shock parts but that's not the fault of the car. As far as gears, I'm still on my originals. Shim and lube and you're GTG. Now it they would release the BBs and maybe steel gears (better safe than sorry) I would be completely content with this buggy.
TJMac is offline