R/C Tech Forums - View Single Post - Capricorn LAB C801 1/8 scale
View Single Post
Old 04-25-2012, 03:32 PM
  #655  
speed6
Tech Addict
 
Join Date: Jul 2005
Posts: 572
Default

Originally Posted by dj apolaro
Reds in the rear and less angle will make more grip in the rear and will not be too soft. I have run this before on a track that had to much front bite.
I would use the White mugen or capricorn blue front springs and Reds in the rear. Lay the front down and up one in the rear. Also use the flat front sway bar to help with the stability. Maybe even give it a 45 degree angle.

Trust me it is worth a try.

Question; I assume you meant to say you can not afford to loose off power stability and not steering, since you are saying you have too much front grip. Am I correct or is it under steering going in.

For the bumpy track also try to drill the piston holes to 1mm. This will help a lot over the bumps.

Good luck,

DJ Apolaro
I meant off power steering, I don't have enough grip car is really lazy around corners off power. Re red spring will give them a try even upfront?
speed6 is offline