R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 04-22-2012 | 03:33 PM
  #21996  
Mizchief's Avatar
Mizchief
Tech Elite
 
Joined: Oct 2011
Posts: 2,069
Default
Originally Posted by cbaranski
Hey guys, I got a problem. I just got a Tekin Pro4 4000kv in my sc10 4wd and its is getting way hot with the gearing the tech support says to run. I started with a 15t pinion and the 62 spur. Run 5 laps and the motor was at 180, the LRP SXX TC was at 135. No boost at all. Went down to a 11t pinion and brang temps to 175, not a whole lot of difference. Need to get this set up going. any help will be appreciated.

Chuck
You must either be running a ton of extra timing or have some drive train issues. I run 16/62 with mine and come off 8min mains in the mid 140's on motor and 120's on the MMP
Mizchief is offline  
Reply