R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 04-21-2012 | 10:04 PM
  #21956  
IRM616's Avatar
IRM616
Tech Master
iTrader: (29)
 
Joined: Nov 2011
Posts: 1,454
From: cali or Vegas
Default
Originally Posted by cbaranski
Hey guys, I got a problem. I just got a Tekin Pro4 4000kv in my sc10 4wd and its is getting way hot with the gearing the tech support says to run. I started with a 15t pinion and the 62 spur. Run 5 laps and the motor was at 180, the LRP SXX TC was at 135. No boost at all. Went down to a 11t pinion and brang temps to 175, not a whole lot of difference. Need to get this set up going. any help will be appreciated.

Chuck
I'm running 4000 with rx8. No drag break. 62/14. Not sure what kind of slipper ur running but if it's loose it will heat up ur motor. Make sure ur belt and everything else is moving freely. That's my opinion.
IRM616 is offline  
Reply