Originally Posted by
drtdvl4
That box came on my SC10 RS. I wish it wasn't there. Every time I need to unplug the ESC to program it or remove the servo I have to remove the cover. It is also hard to plug in the ESC and servo to the rx due to the cramped space in the box. I would like to eliminate it, but the antenna mounts to the cover. Unless you absolute need the cover, I would pass.
You can remove the rx box. Once removed, you will be left with the mounting hole and another hole right next to it. This is for mounting the antenna just like on the rx box. If you look online at the SC10 FT instructions, this is how the antenna is mounted.