R/C Tech Forums - View Single Post - 8th buggy steering servo suggestions
View Single Post
Old 04-20-2012 | 06:08 AM
  #6  
madweazl's Avatar
madweazl
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Originally Posted by GASSPRINT1
the 7.4 high voltage servos are not what they are cracked up to be. they pull alot of voltage. i run the savox servos now and have to charge the 7.4volt receiver battery after 2 heats an practises. first time out with them i ran all day an made 1 lap in the amain and it went too low to work. i run outlaw 8th latemodels. so after every 2 heats i have to charge it back up. now when i ran the futaba 9350/9351 servos, i could got 2 weeks without charging the 6 volt lipo or nmh pack. something to think about for you. i got use to it because i also fly airplanes too. i do have 1 9350 and 2 9351 servos left for $50 apiece if you are still looking to get good ones.. 9351's are still in my mugen buggy..just pm...
The Savox draw a ton of power. I run the Hitec 7950s for steering duties on my 1/8 vehicles. Been in the buggy 3 years now, zero failures, and with the Losi 2000mah LiPo receiver battery, it lasts forever (easily last 2 race days) with a 7940 on throttle. While the Savox may not be what you expected, the Hitec will be more than you expect. Fantastic servos!
madweazl is offline