R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 08-27-2004, 08:17 AM
  #8391  
raving-monkey
Tech Master
 
raving-monkey's Avatar
 
Join Date: Apr 2004
Location: yorkshire, england.
Posts: 1,818
Default

Originally posted by Liam_Davies
Hey Matt (raving-monkey)

I don't think many people in the UK still use receiver packs. With the advent of 3300's and now 19t spec racing, if you have ok gear (unlike me!) you won't dump. Even with a 12t mod you should be ok as long as you don't wedge the throttle stick up when you're racing.

Keep it smooth and make sure you don't have duff cells (like me!) and you'll do 8 minutes fine!

Liam
well thats the thing, i use unmatched GP3300

last meeting i could feel the cells going off about 1min and a half from the end of the heat/final....would i go up or down pinions.

as from what i have worked out, using a smaller pinion makes the mmpr bigger (more top end then) and a bigger pinion gives a lower mmpr (more torque/accel)...this is totally opposite from TC so i am a bit confused....please could someone help
raving-monkey is offline