R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 04-13-2012 | 01:05 PM
  #13699  
Waflet's Avatar
Waflet
Tech Master
iTrader: (35)
 
Joined: Oct 2011
Posts: 1,926
From: helena, alabama
Default

Originally Posted by zipperfoot
Question, if I overshoot a landing on a big jump and land the buggy flat, I can get a pretty severe hop from time to time. Should I go up slightly on the oil, use smaller pistons, stiffer springs, etc. Basically I would like to increase dampening slightly without stiffening up the suspenion. I emphasize "slightly" because the buggy is pretty much dialed except for the occasional hard slap. I run the big bore springs and alternate between the red/white or red/yellow springs. What would you guys do first? Other than learn to downside the jump more consistently... of course.
hideeho
which end bounces? which pistons? I assume the rear & #2. increase by 2.5wt on that end, or both if both bounce. if youve got #3 pistons you might try lighter oil by 2.5-5wt & #2 pistons all around.
Waflet is offline