Originally Posted by
tony montana
well got to race my buggy again yesterday and it didnt go so well. Car was very loose. I was basically a non contender. We had A threw D mains and I was in the middle of the C!!! Car would just spin out to easy. I had the correct tires on for the track as well. My current setup is close to stock minus blue front springs with 40wt. Yellow rears with 35wt, bottom inside hole on the front tower and inside on the hub, Rear, bottom inside hole on the tower, furthest outer hole on the hub. Opt 2 rack. If anyone has suggestions let me know. I went with the long rear camber link trying to slow the reaction down. Nitro car wasnt much better either but thats another story.
The front camber link you have is the most aggressive one. Try 2b. A lot of guys like that one in e buggy. Also the rear try 2c. 1 on the tower will make it twitchy.
Also check your diffs and make sure there is grease on the out drives. Some guys run them dry or don't maintainence them often enough and they can get locked up. Our diffs typically don't leak so you don't get the diff fluid on the outdrives like other buggies.