R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 04-08-2012 | 08:29 PM
  #1982  
RCmayor's Avatar
RCmayor
Tech Elite
iTrader: (9)
 
Joined: May 2003
Posts: 2,745
From: Overland Park, KS
Default

Originally Posted by tony montana
well got to race my buggy again yesterday and it didnt go so well. Car was very loose. I was basically a non contender. We had A threw D mains and I was in the middle of the C!!! Car would just spin out to easy. I had the correct tires on for the track as well. My current setup is close to stock minus blue front springs with 40wt. Yellow rears with 35wt, bottom inside hole on the front tower and inside on the hub, Rear, bottom inside hole on the tower, furthest outer hole on the hub. Opt 2 rack. If anyone has suggestions let me know. I went with the long rear camber link trying to slow the reaction down. Nitro car wasnt much better either but thats another story.
Ya kinda need the full setup. I like the outer holes on the arms better with the heavier springs. More down travel works also especially in front. I like 102mm front shock, 118mm rear shocks.
RCmayor is offline