R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 04-08-2012 | 08:15 PM
  #1981  
mrnizzles's Avatar
mrnizzles
Tech Adept
iTrader: (1)
 
Joined: Jan 2012
Posts: 196
From: CA
Default

Originally Posted by tony montana
well got to race my buggy again yesterday and it didnt go so well. Car was very loose. I was basically a non contender. We had A threw D mains and I was in the middle of the C!!! Car would just spin out to easy. I had the correct tires on for the track as well. My current setup is close to stock minus blue front springs with 40wt. Yellow rears with 35wt, bottom inside hole on the front tower and inside on the hub, Rear, bottom inside hole on the tower, furthest outer hole on the hub. Opt 2 rack. If anyone has suggestions let me know. I went with the long rear camber link trying to slow the reaction down. Nitro car wasnt much better either but thats another story.
did the track conditions change?

when was the last time you rebuild your diffs?

whats your sway bar setup? I would think softer in the rear instead of longer rear camber link. maybe stiffen up the front shock oil/springs as well..

I love nitro stories!
mrnizzles is offline